FM 2009 Conference Program Friday, October 16, 2009 10:00-18:00 Arrival and Registration, Pu Yuan Hotel Saturday, October 17, 2009 8:30 Opening Ceremony, Meeting Room No. 1, Pu Yuan
Hotel 8:35 Address by Vice President of Southwest Jiaotong University 8:45 Address by Chairman of International Steering
Committee 8:55 Opening Address by Symposium Series Chairman 9:05 Conference group photo taken Morning Lectures, Saturday, October 17, 2009 Keynote Lecture 1 9:20 Non-Newtonian mechanics for small bodies (P. 1)
9:50 A numerical failure simulation based on stress-modified
fracture strain model 10:20 Coffee Break Keynote Lecture 2 10:30 Creep Properties of Service-Exposed Alloy 625
After Re-Solution Annealing Treatment and Microstructural Assessment
using Ultrasonic Waves (P. 23) 11:30 Engineering needs of knowledge transfer from
science 12:10 Buffet Lunch (Pu Yuan Hotel)
Session 1A Fracture: Theroy and Application 14:00 Effect of FGM coating on apparent fracture toughness
of a thick-walled cylinder (P. 155) 14:20 Cracking simulation of the hydraulically expanded
tubesheet (P. 551) 14:40 Investigation on compliance method used for compact
tensile specimens in fracture toughness tests of ductile materials (P.
131) 15:00 Fracture criticality based on free surface deformation
measurement (P. 145) 15:20 Coffee Break 15:40 Transient thermo-mechanical coupled in diamond
film and the crack of film during preparation (P. 391) 16:00 Microstructure and fracture characterization
of TiAl matrix by addition of fluoride solid lubircants (P. 121) 16:20 The vibration analysis of shape memory alloy
rectangular plate with a partially crack (P. 451) Session 1B Fatigue: Theory and Application
14:00 The influence of ultrasonic and electric spark
combining surface treatment for Ti17 alloy on the fatigue performances
(P. 275) 14:40 Simulation and fatigue life design of torsion
bar on dynamic Loads (P. 307) 15:00 Fatigue behavior of 42CrMo steel in the very
high cycle regime (P. 261) 15:20 Coffee Break 15:40 Effect of loading rate on low-cycle fatigue damage
of 30Cr1Mo1V rotor steel (P. 255) 16:00 Fatigue damage analysis of composite wind turbine
blade (P. 563) 16:20 Infrared thermography for non-destructive evaluation
of aluminum alloy LY12CZ under low cycle fatigue (P. 483) Session 1C: Strucural Integrity: Relibility
and Safty 14:00 Allowable stress design of rupture strength based
on confidence level of heat resistant steel. (P. 331) 14:20 A method of reliability calculation based on
the acceptance-rejection method (P. 357) 14:40 An improved particle swarm optimization for calculating
failure probability of structure with defects (P. 413) 15:00 Service life and durability of RC structures
exposed to southern and northern coastal area in China (P. 535) 15:20 Coffee Break 15:40 Study on the application of passive energy dissipation
devices in structure retrofitting and performance design (P. 353) 16:00 The limit loads of circular arch pipelines for
volume defects under compound loads (P. 463) Session 1D Transferability and Applicability 14:00 Prediction of distortion in spot welding assembly
(P. 539) 14:40 The stresses induced by carbon diffusion in a
cylindrical structure (P. 575) 15:00 Understanding on surface cracking under cyclic
thermomechanical contact conditions (P. 377) 15:20 Coffee Break 15:40 Application of small punch creep test data for
conventional creep (P. 219) 16:00 Research on the dynamic performance of a widened
T-beam bridge by different connecting method (P. 367) 16:20 Numerical simulation on ratcheting of a cylinder
with a corrosive defect (P. 581)
16:50 Gather at the gate of Pu Yuan Hotel. 17:00-17:20 Visit XiPu campus of Southwest Jiaotong University in the bus. 17:40 Arrive at the Museum of Sichuan Cuisine. 17:50-18:20 Visit the Museum of Sichuan Cuisine. 18:30 Banquet, the Museum of Sichuan Cuisine. Morning Sessions, Sunday, October 18, 2009 Session 2A Fracture: Theory and Application 8:30 Fracture behavior of thermal aged casting duplex
stainless steel for nuclear power plant (P. 151) 8:50 The effects of fracture properties about the ratio
of pipe diameter and aperture (P. 161) 9:10 The interaction between edge dislocations and
an elliptical blunted crack (P. 195) 9:30 The calculation of dynamic fracture parameters
of metal material under impact loading (P. 165) 9:50 Coffee Break 10:10 Prediction on fracture initiation at the interface
corner of composite components (P. 177) 10:30 A study on the influence of stress concentration
in DFZ on the growth of model I crack (P. 189) 10:50 Dependence of ductile fracture on stress triaxiality
factor (P. 115) 11:10 Finite Element Simulation of Ductile Crack Propagation
in Metal Materials (P. 31) Session 2B Fatigue: Theory and Application 8:30 Fatigue crack nucleation behavior in a Nickel-based
PM alloy (P. 291) 8:50 Research on creep behavior of Cr25Ni35Nb centrifugally
cast steel based on the modified projection method (P. 213) 9:10 Finite element analysis of damage properties in
scratch test of TiN/ WC-Co coating cutting tool (P. 347) 9:30 Effect of orientation on low cyclic fatigue of
a directionally solidified superalloy at elevated temperature (P. 265) 9:50 Coffee Break 10:10 Creep-fatigue crack growth behavior in inert
and active environments for 30Cr1Mo1V steel (P. 251) 10:30 Study on microstructure and fatigue behavior
of Fe-Cu-Ni-Mo-C powder metallurgy material (P. 269) 10:50 The influence of hydrodynamic factors on erosion-corrosion
damage of air cooler (P. 425) 11:10 Interface debonding and thermal fatigue life
of Ni base alloy composite (P. 285) 11:30 Improving the creep-fatigue properties for 316L
stainless steel by dynamic strain aging pretreatment technique (P. 245) Session 2C: Strucural Integrity: Relibility
and Safty 8:30 Effect of manufacturing on microstructure and
properties of S30432 austenitic heat-resistant steel tube for USC boiler
(P. 545) 8:50 Analysis on the dynamic loads of the blade bearing
of a wind turbine (P. 557) 9:10 Co-rotational finite element analysis for second-order
effects of high rise plane frame structures (P. 361) 9:30 Precipitation behavior of phase in weld metal
of a TP321H austenitic stainless steel pipe in a synthetic ammonia reforming
furnace (P. 445) 9:50 Coffee Break Session 2D Creep and others 10:10 Creep constitutive relations and creep mechanism
of Ag particle enhancement Sn-0.7Cu based composite solder joints (P.
225) 10:30 Average creep rate model for prediction of stress
relaxation (P. 239) 10:50 Creep characterization of anisotropic conductive
film (P. 207) 11:10 High Temperature Oxidation of 12CrMoV steel under
tensile stress (P. 381) 11:30 Numerical study on stress intensity factor of
subsurface median crackin layered structure due to contact loading (P.
109) 11:50 Hydrogen-facilitated anodic dissolution of deformed
304 stainless steel in acid chloride environment (P. 419) Session 2E Material behavior & characterization 8:30 Effect of hydrogen content on impact property
of A357 alloy (P. 409) 8:50 Effect of the content of Ni on mechanical properties
of Sn0.7Cu solder alloy (P. 507) 9:10 A study on morphology and detection of inclusion
in Al-12Si casting alloy (P.489) 9:30 GIAXD and XPS study of 3C-SiC film prepared by
EB-PVD (P. 297) 9:50 Coffee Break 10:10 Size dependent residual stress field of composite
ceramic with eutectic Interphases (P. 397) 10:30 Experimental study on the surface/subsurface
damage of alumina by nanoindentation (P. 459) 10:50 Autofrettage and shakedown of thick cylinders
under thermal and mechanical loads (P. 569) 11:10 Effects of brazing parameters on the vacuum joint
strength and hardness of Inconel Superalloy (P. 523) 11:30 A simplification method of defects in multilayered
vessels detected by acoustic emission detection (P. 587) 12:10 Buffet Lunch (Pu Yuan Hotel)
Mini-Symposium in Honor of Prof. George C.
Sih 13:30 Determination of the crack arrest in a particle
reinforced composite material under uniform tensile load (P. 85) 13:50 Analysis of arbitrary shaped three-dimensional
cracks by using a virtual crack-closure integral method (VCCM) for tetrahedral
finite element (P. 59) 14:10 Elastic fields of a circular inhomogeneity with
imperfect interface in anisotropic media (P. 71) 14:30 Strain accumulation process under periodical
loading in polymeric materials (P. 79) 14:50 Assessment of mechanical properties of an elastomeric
material exposed to PEM fuel cell environment by microindentation method
(P. 91) 15:10 Structure analysis method in adjusting cable
forces for a cable-stayed bridge by virtual temperature load and its
application (P. 97) 15:30 Indicating the limits of metals to receive surface
engineering treatments in order to improve their fatigue resistance
(P. 65) 15:50 Coffee Break 16:00 Mode III crack problem of two bonded FGPM strips
with embedded arbitrarily oriented cracks (P. 183) 16:20 Discussion on the thickness design of tubesheet
for double tubesheet heat exchanger by FEM (P. 103) 16:40 Investigating the effects of crack geometry and
location on crack growth behavior in a centrally perforated cylinder
under internal pressure (P. 37) 17:00 Study on Evaluation Method of Load-Bearing Capacity
Based on Stochastic Theory for Concrete Girder Bridges in Service (P.
373) 17:20 Panel Discussion and Closing Ceremony 18:30 Buffet Dinner (Pu Yuan Hotel)
Monday, October 19, 2009 8:30-18:00 City Tour of Chengdu (Chengdu Research Base of Giant Panda Breeding, Chengdu Jinsha Site) 18:30 Buffet Dinner (Pu Yuan Hotel) |