|
ISSI-2010 Conference Program General Program Thursday, October 21, 2010 08:00-18:00 Arrival and Registration (Shanghai Airlines Travel Hotel) 09:00-12:00 Workshop on Engineering Methods against Fracture (Room 308, Building 17, ECUST) 18:00-19:00 Reception (Jinlong Restaurant, Shanghai Airlines Travel Hotel) Friday, October 22, 2010 08:45 Opening Ceremony (Conference Room, Yi-fu Building,
ECUST) 08:45 Welcome by President of East China University of Science and Technology 08:50 Address by Chairman of International Steering
Committee 08:55 Opening by Symposium Series Chairman Morning Lectures, Friday, October 22, 2010 Keynote Lecture 1 (Conference Room,
Yi-fu Building, ECUST) 09:00 Greener and higher energy efficiency for materials
and structural systems sustaining against aggressive environment (p.1) 09:35 Consideration of material aging properties in
longer-term failure predictions of cracked components (p.15) 10:10 Group picture taken 10:20 Coffee Break Keynote Lecture 2 (Conference Room,
Yi-fu Building, ECUST) 10:30 The effects of residual stress on fracture assessment 11:05 Current research topics for nondestructive reliability
evaluation in NIMS (p.37) 11:40 Residual stresses in welded nuclear power components
(p.27)
Afternoon Sessions, Friday, October 22, 2010 Session 1A (Conference Room, Yi-fu
Building, ECUST): Creep, Fracture and Fatigue (I) 14:00 Experimental study on creep-ratcheting-fatigue
interaction of SS304 stainless steel at room and high temperatures (p.67)
14:20 Comparison of ductile-to-brittle transition curve
fitting approaches (p.79) 14:40 Bending fretting fatigue damages of 316L austenitic
stainless steel plates against 52100 steel cylinders (p.97) 15:00 Experimental study on residual fatigue life for
a nickel-based powder metallurgy superalloy (p.221) 15:20 Fatigue crack growth behavior in stainless steel
under cyclic torsion (p.227)
14:00 High-temperature corrosion-resistance property
of Fe-Al/Cr3C2RE composite coatings produced by HVFS (p.73) 14:20 Microstructure and intergranular corrosion of
316L stainless steel diffusion bonded joint (p.85) 14:40 Accelerated pitting corrosion of welded SUS304
under freezing and thawing corrosive environment (p.91) 15:00 Stress corrosion crack study of 304 and 316L
stainless steel in dye solution (p.101) 15:20 Corrosion resistance of 321 stainless steel in
high-temperature naphthenic acid (p.105) Session 1C (Meeting Room 3, Yi-fu
Building, ECUST): Residual Stress and Stress Relaxation 14:00 Evaluating residual stress behaviour in 316H
stainless steel using neutron diffraction (p.281) 14:20 Numerical investigating the effect of braze processing
parameters on residual stresses in an X-type lattice truss sandwich
structure (p.341) 14:40 Prediction methodology of stress relaxation performance
based on continuum damage mechanics (p.117) 15:00 Finite element analysis on welding residual stresses
of T-joint (p.329) 15:40 Coffee Break Session 2A (Conference Room, Yi-fu
Building, ECUST): Creep, Fracture and Fatigue (II) 16:00 Effects of service cycles on the microstructure
and tensile property of K4648 superalloy (p.51) 16:20 Characterization of mechanical properties of
HP40Nb using indentation creep test (p.57) 16:40 Fracture mechanism of low cycle fatigue of 30Cr1Mo1V
steel at different loading rates (p.157) 17:00 Determination of mode I fracture toughness, GIC,
of dispersion improved clay/epoxy nanocomposites (p.163) 17:20 Quantitative characterization and analysis of
creep constraint induced by specimen thicknesses in compact tension
specimens (p.213) 17:40 Prediction of creep life in terms of dissipated
power (p.269) Session 2B (Meeting Room 1, Yi-fu
Building, ECUST): Properties Evaluation of Materials 16:00 Experimental study on the mechanical properties
of H13-TiC composite coatings (p.61) 16:20 Strengthened with carbon fiber sheets and its
implementation (p.121) 16:40 A study on the plasma treatment effect carbon
fibers on the wear properties of carbon/epoxy woven composites (p.133) 17:00 Relationship between elevated strength and brazing
parameters of Inconel Superalloy vacuum brazed joints (p.137) 17:20 Temperature rise rate of steam turbine at cold-state
start-up considering the hardness changes of rotor materials (p.141) 17:40 Effect of solid solution treatment on microstructure
and properties of 0Cr18Ni9 Austenite stainless steel butt-welding pipe
fittings (p.147) Session 2C (Meeting Room 3, Yi-fu
Building, ECUST): Modeling and Simulation (I) 16:00 Analysis of fracture property for beam-column
connections of steel frame with cracks (p.167) 16:20 Numerical simulation of crack propagation and
coalescence in plates under creep conditions (p.247) 16:40 Numerical simulation of electromigration failure
in IC interconnect structures (p.349) 17:00 Finite element analysis on the contact stress
of automotive water pump bearing’s seal (p.335) 17:20 FEA analyses under tension and bending fretting
fatigue modes (p.363) 17:40 3-D numerical of simulation of concrete failure
process based on dynamic damage (p.205) 18:00 Banquet (Restaurant in Shangyuan Hotel) Morning Lecture, Saturday, October 23, 2010 Keynote Lecture 3 (Conference Room,
Yi-fu Building, ECUST) 08:40 Relaxation of residual stresses and grain boundary
fracture in 316H stainless steel (p.41) 09:15 A numerical method to simulate ductile failure
of tensile plates with interacting through- wall cracks (p.233) 09:50 Chemo-mechanical interaction in structural integrity:
From fundamental to applications 10:25 Coffee Break Morning Sessions, Saturday, October 23, 2010 Session 3A (Conference Room, Yi-fu
Building, ECUST): Damage Evaluation 10:40 Thermal damage of cementitious materials: an
elasto-plastic damage model for plain concrete subjected to high temperatures
(p.189) 11:00 Damage tolerance assessment and test verification
for an aeroengine crankcase (p.183) 11:20 Two-step damage identification approach for a
multi-layer concrete frame structure based on wavelet analysis and BP
neural network (p.199) 11:40 Fatigue-cracking representation and its evolution
for spherical contacts (p.261) Session 3B (Meeting Room 1, Yi-fu
Building, ECUST): Analysis of Structural Design 10:40 Free vibration analysis of thin rectangular cracked
plate with four free edges on nonlinear elastic foundation (p.173) 11:00 Research on effect of anti-vibration bars on
dynamic characteristic of U-tubes in steam generator (p.257) 11:20 Effect of the applied torque on the PEM fuel
cell performance (p.299) 11:40 Numerical simulation and structure optimization
of coal-liquefying reactor (p.355) Session 3C (Meeting Room 3, Yi-fu
Building, ECUST): Modeling and Simulation (II) 10:40 Contact resistance and contact behavior prediction
between the bipolar plate and the GDL in a proton exchange membrane
fuel cell (p.305) 11:00 A new form of strain gradient elasticity (p.311) 11:20 Reinforcement of pressure vessels with large
opening (p.323) 11:40 Simulation of inclusion shape change in steel
strips during cold rolling (p.405) 12:00 Lunch (Jinlong Restaurant, Shanghai Airlines Travel Hotel) Afternoon Sessions, Saturday, October 23, 2010 Session 4A (Conference Room, Yi-fu
Building, ECUST): Reliability & Safety Assessment (I) 14:00 Failure analysis of 20G boiler tubes (p.127) 14:20 Failure mechanism of inconel 718 at elevated
temperature (p.179) 14:40 A new DEM for interaction between adjacent RC
membrane structures (p.385) 15:00 Ratcheting analysis of pressurized piping with
pit defects (p.417) 15:20 Identification of structural parameters by the
weighted least square method based on wavelet packet transform (p.373) 15:40 Analysis of uneven settlement effects on the
widened bridge (p.369) Session 4B (Meeting Room 1, Yi-fu
Building, ECUST): Reliability & Safety Assessment (II) 14:00 Study on limit load and safety assessment method
for pressure pipe with an internal pit at high temperature (p.275) 14:20 Limit loads for part-through surface axially
cracked elbows under internal pressure (p.287) 14:40 Safety assessment of pipes with multiple local
wall thinning defects under bending moment (p.293) 15:00 Structure strength and safety analysis of CO2
stripper with large opening under vertical position (p.317) 15:20 Study on the non-probabilistic interval reliability
of pressure pipe containing defects (p.379) 15:40 Finite element stress analysis of semi-trailer
liquefied petroleum gas tanker (p.365) Session 4C (Meeting Room 3, Yi-fu
Building, ECUST): Detection and Monitoring 14:00 Research on anisotropy properties of A350 pressure
vessel steel forging by small punch test (p.111) 14:20 The influence of tensile stress on the magnetic
memory signals of Q345R steel (p.153) 14:40 A new method for assessment of spurious trip
in safety instrumented system (p.393) 15:00 On-line monitoring of high-temperature piping
by strain sensing units (p.399) 15:20 A method of assessing power-law creep constants
using small punch creep test in high temperature components (p.411) 16:00 Coffee Break 16:20 Panel Discussion (Conference Room, Yi-fu Building, ECUST): Future Research and activities Co-Chairmen: Shan-Tung Tu, Keebong Yoon Panelists: G.C. Sih, F.Z. Xuan, X.D. Chen, Q.W. Dong, Y. J. Kim, D. Smith, P. E. J. Flewitt, Z.L. Gao, X.S. Tang, J.M. Gong, G.Z. Kang, Z.D. Wang, S.J. Wu, W.Q. Wang, J. Zhao, X. Chen. 17:30 Closing 18:00 Dinner (Jinlong Restaurant, Shanghai Airlines Travel Hotel) Sunday, October 24, 2010 Visiting |