General Program

Wednesday, October 31, 2007
12:00-18:00 Arrival and Registration at Wu Hua Hotel of Changsha, Hunan, China.
18:30-20:00 Welcome banquet, Wu Hua Shi Fu, Third Floor, Wu Hua Hotel.

Thursday, November 1, 2007
8:25 Opening Ceremony, Meeting Hall, First floor, Jiao Tong Building, Changsha University of Science and Technology
Chairman: Prof. Xue-Song Tang (Changsha University of Science and Technology)
8:28 Welcome by Secretary General of the CPC Committee of Changsha University of Science and Technology
Yao-Zhong Wang (Changsha University of Science and Technology)
8:36 Address by President of Changsha University of Science and Technology
Jian-Long Zheng (Changsha University of Science and Technology)
8:44 Address by Chairman of International Steering Committee
George C. Sih (ECUST, China/ Lehigh University, USA)
8:52 Opening by Symposium Series Chairman
Shan-Tung Tu (East China University of Science and Technology)
9:00 Have a group picture taken

Technical Program

Morning Lectures, Thursday, November 1, 2007

Keynote Lecture 1
Meeting Hall, First floor, Jiao Tong Building, Changsha University of Science and Technology
Chairman: Prof. Shan-Tung Tu
9:20 Multiscaling aspects of fail-safe for material and structure (P.1)
G.C. Sih (ECUST, China/ Lehigh University, USA)
10:00 Design criteria for multiaxial low cycle fatigue (P. 21)
T. Itoh, M. Sakane (University of Fukui, Japan)
10:40 Coffee Break

Keynote Lecture 2
Meeting Hall, First floor, Jiao Tong Building, Changsha University of Science and Technology
Chairman: Prof. George C. Sih
10:50 Development and Application of RBI Procedure for Process and Power Plants in Korea
K. B. Yoon (Chung Ang University, Korea)
11:30 Experience with the use of P91 steel and development of tools for component integrity/life assessment (P. 377)
A. Shibli, D. Robertson (European Technology Development Ltd., UK)

12:30 Buffet Lunch (Yang Guang Ge, Second Floor, Wu Hua Hotel)

Afternoon Lectures, Thursday, November 1, 2007

Keynote Lecture 3
Bai Sha Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Takamoto Itoh
14:00 Elastic-plastic behaviours of pressurised pipes under cyclic thermal stresses with
temperature gradients (P. 47)
C. S. Oh, Y. J. Kim (Korea University, Korea)
14:30 Creep damage mechanisms in Ni-base superalloys focusing on the distribution of alloying elements in ? and ?. phases (P. 35)
K. Ogawa, T. Niki, K. Nobusawa, T. Shoji (Tohoku University, Japan)
15:00 Discussion of several life prediction methods for fatigue-creep interaction (P. 39)
X. D. Chen, Z. C. Fan, L. Chen, J. L. Jiang, T. C. Yang (Hefei General Machinery Research Institute, China)
15:30 Micro structural origin of the apparent thermal transient creep of concrete at high
temperature (P. 79)
A. Menou, G. Mounajed, H. Boussa, Ch. La borderie (University of Pau, France)

16:00 Coffee Break

Afternoon Sessions, Thursday, November 1, 2007

Session 1A: Fatigue Life Prediction
Bai Sha Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Takamoto Itoh
16:20 Prediction of fatigue life characteristic of real waterwork pipe using linear transformation by the probability density function (P. 63)
J.H. Choi, S.K. Cho, D.J. Kim, J.M. Koo, C.S. Seok, W.K. Song
16:40 Fatigue failure mechanisms of plasma-sprayed CrC-NiCr cermet coatings in rolling contact (P. 69)
X.C. Zhang, B.S. Xu, F.Z. Xuan
17:00 Elevation of fatigue behavior of T-type welded joint in the small - sized single pass boiler (P. 89)
Nu Yan, H. Yamakawa, R. Murakami, D.Yonekura
17:20 Notch fatigue assessment of four critical plane strain energy criteria based on mixed cracking mode (P. 107)
Baoxiang Qiu, Zengliang Gao, Xiaogui Wang

Session 1B: High Temperature Materials
Phoenix Hall, Fourth Floor, Wu Hua Hotel
Chairman: Dr. Ahmed Shibli
16:20 Remaining life and fracture evaluation of Incoloy800H furnace tubes serviced at high temperature for 100,000 hrs (P. 357)
Yong Jiang, Jianming Gong, Zhongzheng Zhang, Ruisong Zhu, Dongxing Xi
16:40 Creep analysis of the pipe with local thinning defect under pressure and moment at high temperature (P. 207)
Changyu Zhou, Jilin Xue, Guodong Zhang
17:00 Failure analysis of a thermocouple protection tube in a steam-entering pipe of a steam turbine (P. 273)
Deming Fang, Shuihua Zheng, Changjiang Huang, Ying Li
17:20 Modeling on strain softening and Portevin-LeChatelier effect in crystalline materials based on mesoplasticity (P. 201)
Wenge Zhang, Xuedong Chen, Tiechen Yang , Bing Wang

Session 1C: Damage and Fracture (I)
Ai Wan Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Kazuhiro Ogawa
16:20 Net-section limit moments for circumferential cracks at the interface between elbows and pipes (P. 141)
Chang-Kyun Oh, Tae-Kwang Song, Yun-Jae Kim, Jong-Sung Kim, Tae-Eun Jin
16:40 A nonlinear incremental damage model for fatigue-creep fracture (P. 93)
Jie Dong, Xuedong Chen, Huifeng Jiang, Zhichao Fan, Shouxiang Lu
17:00 Delamination growth of composite laminated cylindrical shells under radial uniformly distributed dynamic load (P. 309)
Jinhua Yang, Xingye Chen, Chuanxi Li
17:20 Energy release rate for delaminated laminates circular plates subjected to transverse loads (P. 177)
Deliang Chen, Yi-ming Fu
18:00 Buffet dinner, Yang Guang Ge, Second Floor, Wu Hua Hotel

Morning Sessions, Friday, November 2, 2007

Session 2A: Creep and Fatigue
Bai Sha Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Yun-Jae Kim
8:20 Transient behavior of creep crack growth under non-steady loading (P. 31)
K.S. Kim, W.S. Yoon
8:40 Effect of plasma nitrocarburizing on fatigue strength of SCM435 steel (P. 85)
Jianjun Sun, Nu Yan, Insup Lee, Riichi Murakami
9:00 Low cycle fatigue characteristics of two steels for railway wheel and axle (P. 113)
D.J. Kim, S.K. Cho, J.H. Choi, J.M. Koo, C.S. Seok, J.W. Seo
9:20 An equivalent strain energy density life prediction model (P. 277)
Zhichao Fan, Xuedong Chen, Ling Chen, Jialing Jiang
9:40 A new life prediction method for stress controlled fatigue-creep interaction (P. 97)
Huifeng Jiang, Xuedong Chen, Zhichao Fan, Jie Dong, Shouxiang Lu

Session 2B: Industry Application (I)
Phoenix Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Fuzhen Xuan
8:20 Fatigue life evaluation of disk brake of railway vehicle considering pressure distributions at frictional surface (P. 117)
S. K. Cho, D. J. Kim, J. H. Choi, Y. M. Lee, C. S. Seok
8:40 An investigation on support plate of steam generator by modal analysis (P. 217)
Qiwu Dong, Tong Liu, Minshan Liu
9:00 Study on factors influencing dynamic properties of steam generator U-tubes (P. 223)
Minshan Liu, Tong Liu, Qiwu Dong
9:20 Research on the optimal structural parameter of interrupted type concrete straight-road barrier with certain length concrete frusta (P. 249)
Zhengbao Lei, Lan Liu, Haiqi Yan, Jinxiu Yu, Zhigang Zhou
9:40 Characteristics of dynamic mechanical properties of high strength steels (POSTEN60, POSTEN80) (P. 173)
Gab-Chul Jang, Kyong-Ho Chang, Chin-Hyung Lee

Session 2C: Mathematical Modelling
Ai Wan Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Abdellah Menou
8:20 Formulation for tangent stiffness matrix of 3-D smeared rotating crack concrete model (P. 169)
Songbai Cai, B.A. Izzuddin, A.Elghazouli, P. Shen
8:40 Numerical solutions of diffusion-controlled migrating interface problems for studying brazing SS304/BNi-2/SS304 joint (P. 131)
Hu Chen, Jian-ming Gong, Shan-Tung Tu, Wenchun Jiang
9:00 Seismic response and dynamic characteristic analysis of the complex intake tower structure (P. 229)
Chenggang Ma, Yongxing Lai, Minshan Liu
9:20 Nonlinear dynamic beam under moving load with time delay feedback control (P. 301)
Changzhao Qian, Jiashi Tang
9:40 The flow forming process simulated by finite element method (P. 341)
Changhong Liu, Fu-zhen Xuan, Xintian Liu, Lihui Zhao, Xiaoyong Zhao

10:00 Coffee Break

Session 3A: Damage and Fracture (II)
Bai Sha Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Qi-Wu Dong
10:20 Experimental study on fatigue growth of surface cracks on overlay of hydrogenation reactor (P. 103)
Shiming Shen, Guoquan Ding
10:40 Influence of mesh type and size on crack growth modeling (P. 213)
Hong Huang, Xiaogui Wang, Zengliang Gao
11:00 Limit load of mismatched welded joint containing cracks (P. 157)
Chunwei Ma, Fu-zhen Xuan, Zhengdong Wang
11:20 Investigation on the leak accident prediction of petrochemical installations (P. 265)
Songbai Cheng, Guohua Chen
11:40 Damage identification for concrete continuous rigid frame bridge based on curvature mode and BP neural network (P. 57)
Zhao Li, Xuesong Tang, Xingye Chen

Session 3B: Industry Application (II)
Phoenix Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Jian-Ming Gong
10:20 Research on partial safety factor of structural integrity assessment (P. 153)
Shuo Pan, Jianping Zhao
10:40 Relief of tensile residual stress in girth joint of AISI 316 steel by deep cryogenic treatment (P. 373)
Qiongqi Wang, Weize Wang, Fu-zhen Xuan, Zhengdong Wang, Shan-Tung Tu
11:00 Vibration analysis and fault diagnosis of the fan unit and support structure (P. 239)
Shaoping Zhou, Jie Zhang, Yongsheng Su
11:20 Effects of loading rate, notch geometry and loading mode on the local cleavage fracture stress of a C-Mn steel (P. 125)
Guozhen Wang, Yuliang Wang
11:40 Stability analysis of the continuous rigid frame bridge with large-span and high-pier by energy methods (P. 319)
Yigang Lv

Session 3C: Failure and Instability
Ai Wan Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Zheng-Bao Lei
10:20 The plastic limit load of elbows under in-plane bending moments (P. 163)
Zhixiang Duan, Shiming Shen, Lifang Zhou
10:40 Fluidelastic stability criterion analysis of tube bundles with energy equation (P. 243)
Yongxing Lai, Ke Wang, Qiwu Dong
11:00 Research on microstructure of Zn-based polymer namicomposite (P. 345)
Baiyang Lou, Bin Xu, Kangchun Luo, Kezai Miao
11:20 The research on failure of pressing die (P. 349)
Bin Xu, Baiyang Lou
11:40 Reliability analysis for CNG storage gas pressure vessel using finite element method (P.367)
Junge Du, Yaxin Zhang

12:00 Buffet Lunch, Yang Guang Ge, Second Floor, Wu Hua Hotel

Afternoon Sessions, Friday, November 2, 2007

Session 4A: Dynamics and Vibration
Bai Sha Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Dae-Jin Kim
14:00 The self-excited vibration mechanism and diagnosis of turbo generator set (P. 259)
Shaoping Zhou, Yongsheng Su, Jie Zhang, Xiuhai Li
14:20 Nonlinear vibration for moderate-thickness cracked plate with dowels on elastic foundation (P. 337)
Yonggang Xiao, Chongmei Peng, Jiafeng Zhong
14:40 Fouling characteristics of sintered porous surface tubes for heat exchangers in sodium chloride solution (P. 289)
Along Liu, Hong Xu, Yan Sun, Hongzhi Wang, Li Zhang, Jinglei Liu, Xuesheng Wang
15:00 Study on properties of heat transfer and scaling for gas-liquid two-phase flow in the vertical tube (P. 295)
Suolong Zhang, Keping Chen, Qiwu Dong, Peining Li

Session 4B: Algorithm Study
Phoenix Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Xue-Song Tang
14:00 A quality inspection method of blade based on genetic algorithm (P. 283)
Hui Guo, Jiazhen Pan
14:20 Manufacturing of nozzles combined with reinforcement pad (P. 327)
Zhengfang Wang, Yong Wang, Dawei Qu, Tingbo Sun
14:40 Nonlinear forward-iteration method for Cable-stayed bridge (P. 351)
Changsong Chen , Donghuang Yan, Zhengqing Chen
15:00 Geometric nonlinear tangent stiffness matrix with uniform expression for plane truss, beam and plane elements (P. 195)
Jihua Deng, Xudong Shao, Songbai Cai

Session 4C: Nonlinear Analysis and Design
Ai Wan Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Kwang-Soo Kim
14:00 Elastic-plastic simulation aimed to grinding of advanced ceramics (P. 363)
Yumei Bao, Guozhong Chai, Weina Hao
14:20 Optimal design for sealed cabin of underwater high-speed photography system (P. 331)
Mande Shen, Liangyi Chen, Junhua He, Faquan Zhang
14:40 Nonlinear response analysis for cable-stayed bridge by considering girder-tower coupling effect under earthquake excitation (P. 181)
Xingye Chen, Zhao Li, Xuesong Tang
15:00 Analysis of creep and shrinkage effects in Buliu River Bridge (P. 187)
Weian Wang, Jianren Zhang, Qianhua Yu, Shunkun Tan
15:40 Coffee Break

16:00 Panel Discussion and Closing Ceremony
Bai Sha Hall, Fourth Floor, Wu Hua Hotel
Chairman: Prof. Shan-Tung Tu

17:30 Closing

18:00 Banquet, Wu Hua Shi Fu, Third Floor, Wu Hua Hotel

View Program

Nov. 3-5, 2007, view Zhangjiajie
18:00, Nov. 5, 2007, return to Wu Hua Hotel in Changsha.

Return to FM2007 Home Page