|
FM 2008 Conference Program General Program Friday, October 31, 2008 12:00-18:00 Arrival and Registration, First Building,
Hangzhou Hua Jia Shan Resort Saturday, November 1, 2008 8:30 Opening Ceremony, Baihua Hall, Third floor, Second
Building, Hangzhou Hua Jia Shan Resort 8:40 Address by Vice President of Zhejiang University
of Technology 8:45 Address by Chairman of International Steering Committee 8:55 Opening by Symposium Series Chairman 9:05 Conference group photo taken Technical Program Morning Lectures, Saturday, November 1, 2008 Keynote Lecture 1 9:20 Conceptual and physical disparity inherent in the
modeling of multiscale fatigue crack growth: nano-micro-macro (P. 1) 10:00 Fracture based structural integrity in welded structures
under elevated temperatures 10:40 Coffee Break Keynote Lecture 2 10:50 Ionic polymer metal composite as a soft actuator
and sensor 11:30 High-temperature fracture behavior of ceramic matrix
composites: an overview 12:10 Buffet Lunch (Guixiang Yuan Hall, First Building, Hua Jia Shan Resort) Afternoon Sessions, Saturday, November 1, 2008 Session 1A: Relibility and Probability 13:30 An important sampling simulation for the failure
probability of creep damage (P. 51) 13:50 Comparative assessment of fracture toughness data
using diverse statistical distributions (P. 63) 14:10 Reliability evaluation of structural systems subjected
to seismic loading (P. 327) 14:30 Reliability analysis of ice-covered wire subjected
to wind load (P. 333) 14:50 Fault diagnosis system of virtual compressor based
on probabilistic neural network (P. 523) 15:10 Limit load analysis of localized wall-thinning for
steam generator tubes (P. 307) 15:30 Development of finite element program for analysis
of seismic respond of large scale storage tanks (P. 339) Session 1B: High temperature material 13:30 Experimental study and numerical simulation on high
temperature & low cycle short fatigue cracks (P. 185) 13:50 LCF behavior and lifing of a directionally solidified
nickel base superalloy at high temperature (P. 217) 14:10 Thickness monitoring online by welded ultrasonic
waveguide for pressure piping at high temperature (P. 541) 14:30 Microstructure and mechanical properties of Cr9Mo
tube after long time service at high temperature (P. 395) 14:50 Research on corrosion behavior of 16MnR steel and
its welded joints in high-temperature naphthenic acid solution (P. 365) 15:10 The safety evaluation and life prediction for local
wall thinning elbows of high temperature steam pipeline (P. 323) 15:30 Life prediction for high temperature bolting of
ultra-supercritical units (P. 275) Session 1C: Creep and Fatigue 13:30 The influence of stress relaxation on high temperature
creep life of steam turbine rotor steel (P. 257) 13:50 The creep behavior analysis of PMMA with different
stress and under different temperature (P. 261) 14:10 Creep-rupture property analysis and reliability
prediction of creep-rupture life for low alloy heat-resistant CrMo steel
(P. 265) 14:30 Stress controlled fatigue-creep behavior of 316L
stainless steel under different temperatures (P. 303) 14:50 High temperature fatigue creep life prediction of
316L stainless steel under 2-step load (P. 299) 15:10 Selection of TTP parameter in creep-rupture life
prediction (P. 281) 15:30 Investigation on creep crack growth rate in heat
affected zone of welded joint for 9% Cr ferritic heat resistant steel
(P. 271) Session 1D: Damage and Fracture 13:30 A nonlinear high-order FEM for analysis of RC wall
structures with material model of smeared rotating cracks (P. 179) 13:50 Residual fracture energy of cement past, mortar
and concrete subject to high temperature (P. 55) 14:10 A modified fracture criterion of maximum circumferential
normal stress for an interface crack (P. 91) 14:30 Damage assessment for beam structure using perturbation
method (P. 105) 14:50 Fracture analysis of twisted rubber-steel sphere
bush with an elliptical surface crack (P. 173) 15:10 Fracture damage micro-mechanism of SnAgCu/Cu solder
joint (P. 401) 15:30 Effects of initial void damage induced by warm prestressing
(WPS) on cleavage fracture of notched steel specimens (P. 417) 15:50 Coffee Break Session 2A: Safety and Failure 16:00 Safety analysis of pressure piping containing incomplete
penetration under combined loads (P. 313) 16:20 Safety assessment of large-scale tanks (P. 319) 16:40 Failure analysis of heat exchanger tubes used in
a lithium bromide central air-conditioning unit (P. 343) 17:00 Failure analysis of risk load on transmission tower
(P. 347) 17:20 Fracture failure analysis of electric tool gear
(P. 351) 17:40 Failure load of concrete beam reinforced by aramid
fiber sheet under four-point bending at sheet rupture mode (P. 355) 18:00 Experimental study on failure behavior of concrete
plates under different support conditions (P. 361) Session 2B: Dynamics and Vibration 16:00 Numerical analysis of dynamic characteristics of
the graphite heat exchange tube with half-ellipse cracks (P. 133) 16:20 Finite element analysis of dynamic stress of the
outdoor unit of air conditioner (P. 153) 16:40 Study of dynamic properties of flexible polyurethane
foam (P. 469) 17:00 Pushover analysis and application for a continuous
rigid frame bridge by considering high order vibrational modes (P. 501) 17:20 Thermally induced vibration in a viscoelastic plate
under the wave heat shock (P. 507) 17:40 Effects of road surface roughness on vibration of
highway bridge due to the vehicle (P. 513) 18:00 Simulation of Fatigue Cracks with a Distributed
Dislocation Dipole Technique Session 2C: Fatigue analysis 16:00 A CDM model for remaining fatigue-lifetime prediction
of ductile metals (P. 191) 16:20 Fatigue strength assessment for steel casting weld
joints (P. 197) 16:40 Investigation on the cracking behavior of rolling
contact fatigue of 1070 steel (P. 463) 17:00 The effect of multiple repairing weld and TIG-dressing
on T-shape joints weld bead fatigue strength (P. 209) 17:20 The study of fatigue behavior of countersunk fastener
holes (P. 213) 17:40 Torsional fatigue behaviors of 16MnR welded joint
(P. 203) 18:00 The relationship between hydrogen and ultrasonic
surface wave attenuation of stainless steel (P. 527) Session 2D: Damage and Fracture 16:00 Damage detection for steam generator U-bend tubes
from changes in their vibration modal characteristics (P. 423) 16:20 Study on stress intensity factor of a finite width
laminate (P. 47) 16:40 The fractal research of the tensile fracture for
the grain filled polymer composite material ABS/TiO2 (P. 429) 17:00 Impact fracture and residual stress analysis of
2Cr13 steam turbine blades after laser alloying (P. 439) 17:20 Thickness effect on the ductile fracture properties
of the vessel steel with Small Punch testing techniques (P. 451) 17:40 The environment fracture susceptibility of high-strength
bainitic low alloy steels containing silicon (P. 457) 18:00 The local plastic collapse of ligament for circumferentially
part-through wall cracked pipes (P. 75) 18:20 Banquet, Guixiang Yuan Hall, First Building, Hangzhou Hua Jia Shan Resort
Keynote Lecture 3 8:30 Suggestions for Safety Improvement of Vessels used
in CNG Bus Based on Failure Analysis 9:00 Multiaxial fatigue 9:30 Multiaxial creep and creep-fatigue damage for type
304 stainless steel 10:00 Coffee Break Keynote Lecture 4 10:20 Finite element simulations of ductile failure and
hydrogen diffusion 10:50 High Temperature Component Life Assessment 11:20 A new method to fatigue initiation and crack growth
prediction (P. 37) 12:00 Buffet Lunch (Guixiang Yuan Hall, First Building, Hangzhou Hua Jia Shan Resort) Afternoon Sessions, Sunday, November 2, 2008 Session 3A: Fatigue Anlysis 13:30 Low cycle fatigue behaviors of low-velocity-impacted
(LVI) aluminum-alloy plate (P. 245) 13:50 Effect of weld defect on fatigue life for electron-beam
welded titanium alloy (P. 251) 14:10 Tensile and low cycle fatigue behavior of primary
pipe material for PWR nuclear power plant (P. 293) 14:30 Study on immune algorithm for the fatigue crack
growth rate of 30Cr1Mo1V steel (P. 233) 14:50 Effect of surface nanocrystallization on fatigue
behavior of 35# carbon steel (P. 549) Session 3B: Experimental Research 13:30 Experimental study on fatigue behavior of honeycomb
sandwich panel using three point bending tests (P. 229) 13:50 An experimental study of fatigue crack growth with
step loading condition (P. 239) 14:10 Experimental study on uniaxial time-dependent ratchetting-
fatigue interaction of T6-6061AL alloy (P. 287) 14:30 Experimental investigation on the adhesively bonded
repair of composite structures (P. 381) 14:50 Experimental research on stress corrosion cracking
of X70 pipeline steel in nitrate solutions (P. 385) Session 3C: Mathematical Modelling 13:30 Modeling of thin film growth during metal dusting
(P. 69) 13:50 The diffusion-induced stresses during metal dusting
(P. 79) 14:10 Nonlinear analysis of prestressed concrete cable-stayed
bridges with long span under construction state (P. 95) 14:30 Modeling of multilayered thin film processed with
laser forming (P. 111) 14:50 Numerical simulation of tensile performance of polymers
(P. 117) Session 3D: Material behavior 13:30 Experimental research on mechanical Property of
SPV490Q steel after fire exposure (P. 407) 13:50 Effect of NiCrAlYSi coating on HCF behavior of a
directionally solidified nickel base superalloy (P. 223) 14:10 The shear strength of the flip-chip solder bump
(P. 443) 14:30 Definition of yield load on small punch test by
means of double slope of elastic curve (P. 447) 14:50 Thermal cycle behavior of atmospheric plasma sprayed
thermal barrier coatings (P. 475) 15:10 Coffee Break Session 4A: Corrosion 15:20 Grey predication of corrosion on oil atmospheric
distillation equipment (P. 371) 15:40 Stress corrosion cracking test of 16MnR Steel in
wet hydrogen sulfide and carbonate solutions (P. 377) 16:00 Research on anti-corrosion property of high-solid
epoxy/polyurethane coating of magnesium alloys (P. 389) 16:20 A new method improving intergranular corrosion resistance
of AISI 304 stainless steel: deep cryogenic treatment (P. 411) 16:40 The effect of environment on resisting chloride
permeability in marine concrete (P. 433) Session 4B: Industry Application 15:20 Application of object-oriented bayesian networks
for PFFSA of the piping in the ammonia synthesis unit (P. 517) 15:40 An on-line health monitoring technique for hydrogen
reformer tubes (P. 531) 16:00 Application of surface technology to structural
crack monitoring (P. 537) 16:20 Monitoring of hydrogen embrittlement for hydrogenation
processing plants (P. 545) 16:40 A study on improvement of replication method by
applying electrolytic polishing technique (P. 553) Session 4C: Mathematical Modelling 15:20 Numerical simulation of mode I crack tip field on
GTN void constitutive model (P. 129) 15:40 The numerical simulation of multi-step sheet metal
forming of aerosol can’s cap (P. 143) 16:00 Finite element numerical simulation of stamping
forming of crossbeam for automobile (P. 159) 16:20 Stress analysis and structural optimization for
the opening flat cover of pressure vessels (P. 169) 16:40 The use of ABAQUS to simulate temperature and residual
stress fields in unclosed hoop weldments (P. 147) Session 4D: Algorithm Study 15:20 A parametric numerical analysis of stress intensity
factors on multiple interacting surface cracks in T-butt joints using
FRANCE3D (P. 123) 15:40 Post-buckling analysis of composite thick-skin multi-spar
wing box under bend and twist load (P. 163) 16:00 Calculating method of radial stiffness of cylindrical
roller bearings (P. 481) 16:20 Optimum design of an active micro-mixer using the
Kriging metamodel (P. 85) 16:40 Optimal excitation frequency for delamination detection
in cross-ply laminated beams using A0 lamb mode (P. 497) 17:00 Panel Discussion and Closing Ceremony 18:00 Buffet dinner, Guixiang Yuan Hall, First Building, Hangzhou Hua Jia Shan Resort View Program Nov. 3, 2008, City Tour of Hangzhou. |